Coleman 5070 Series Instruction Manual

Browse online or download Instruction Manual for Water heaters & boilers Coleman 5070 Series. Coleman 5070 Series Instruction manual [en] User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 15
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
ENGLISH
FRENCH
SPANISH
PPRROOPPAANNEE
FFOORRCCEEDD--AAIIRR
HHEEAATTEERRSS
Models: 5070 and 5075 Series
®
ANSI Z83.7-CSA 2.14 - (2000)
CONSTRUCTION HEATER
INSTRUCTIONS FOR USE
IMPORTANT
Read this manual carefully before assembling, using or servicing this
heater. Keep this manual for future reference. If you have questions about
assembly, operation, servicing or repair of this heater, please call Coleman
at 1-800-835-3278 or TDD: 316-832-8707. In Canada call 1 800 387-6161.
This product is designed and approved for use as an
indoor construction heater in accordance with ANSI
and CSA standards. It is intended for temporary
heating of unoccupied buildings under construction,
alteration or repair. It is not intended for home or
recreational use.
CERTIFIED
®
©2006 The Coleman Company, Inc.
Page view 0
1 2 3 4 5 6 ... 14 15

Summary of Contents

Page 1 - HHEEAATTEERRSS

ENGLISHFRENCHSPANISHPPRROOPPAANNEE FFOORRCCEEDD--AAIIRR HHEEAATTEERRSSModels: 5070 and 5075 Series®ANSI Z83.7-CSA 2.14 - (2000)CONSTRUCTION HEATERIN

Page 2 - INFORMATION

10ContinuedMAINTENANCEContinued6. FAN - Clean every 500 hours of operation or as needed.A. Remove screws along each side of heater and on top of the m

Page 3

ENGLISH11ContinuedTROUBLE-SHOOTINGWARNINGNever attempt to service heater while it is plugged in, connected to propanesupply, operating or hot. Severe

Page 4 - IDENTIFICATION

WARNINGNever attempt to service heater while it is plugged in, connected to propanesupply, operating, or hot. Severe burns and electrical shock can oc

Page 5 - OPERATION

ENGLISH13REPLACING FAN1. Remove motor/guard assembly (follow steps 1 through 4 above).2. File the setscrew mark off the motor shaft.3. Replace fan (fo

Page 6

WIRING DIAGRAM14WARNINGUse only original replacement parts. Do not substitute or use generic parts.Improper replacement parts could cause serious or f

Page 7

5070D050 (1/16/2006)The Coleman Company, Inc.3600 N. HydraulicWichita, KS 67219 U.S.A.1-800-835-3278TDD: 316-832-8707TECHNICALSERVICEASSISTANCEÀ LACLI

Page 8

2GENERALSAFETYINFORMATIONSafety Information continues on next pageThis manual contains important information about the assembly, operation and mainte-

Page 9 - To Stop Heater

ENGLISH3MAKE SURE ADEQUATE VENTILATION IS PROVIDED. Provide a freshoutside air opening at least three (3) square feet (0.3 m2) or its equivalent, i.e

Page 10 - Continued

4Product IdentificationFigure 1 - 40,000 BTU/Hr. ModelFigure 2 - 50,000 to 80,000 BTU/Hr. ModelTop ShellPOL FittingPropaneHose/RegulatorAssemblyAutoma

Page 11 - SCHEDULE

ENGLISH51. Remove all packing items applied to heater for shipment. Keep plastic cover caps (attached to inlet connection and hose/regulator assembly)

Page 12 - PROCEDURES

6ContinuedNUMBER OF TANKS REQUIRED Average Temperature (°F)At Tank Location 32° 20° 10° 0° -10°(0°C) (-7°C) (-12°C) (-18°C) (-23°C)5070A751 (40,000 BT

Page 13

ENGLISH7Continued3. Connect POL fitting on hose/regulator assembly to propane tank(s). Turn POL fitting counterclockwise into threads on tank. Tighten

Page 14 - REPLACEMENT

4. Plug power cord of heater into a three-prong, grounded extension cord. Extension cord must be at least six feet long. Extension cord must be ULlist

Page 15 - 5070D050 (1/16/2006)

ENGLISHContinued9To Stop Heater1. Tightly close valve on propane tank(s).2. Wait a few seconds. Heater will burn gas left in hose.3. Unplug heater.OPE

Comments to this Manuals

No comments