Event Grill9995A SeriesINSTRUCTIONS FOR USE© 2004 The Coleman Company, Inc.www.coleman.com• 9-volt Battery included• 20# L.P. gas cylinders not includ
10Step 3 Remove Regulators fromPropane Cylinder Connection. Remove Grease Pans. Slideout from front of grill to clean orinstall new aluminum liners
11Step 11 To raise Legs, pull out on Braces while depressing the Catches tounlock. Raise Legs to storage position. Lock Grill Legs as shown.BraceCa
12WARNING• Keep grill area clean and free from combustible materials, gasoline and other flammable vapors, liquids, and spare L.P. cylinders.• DO NOT
13Problem Possible Cause SolutionBurner won’t light Gas pressure is low. Cylinder is empty. Replace cylinder.Air in gas line. Burner may take up to on
15Notes
®The Coleman Company, Inc. • 3600 N. Hydraulic • Wichita, KS 67219 U.S.A.1-800-835-3278 • TDD: 316-832-87079995A021 (7/15/2004)©2004 The Coleman Comp
2General Safety Information 2-3General Installation 3Portable L.P. Gas Barbecue Cylinders 4L.P. Gas Cylinder 4-5Hose and Regulator 5Transporting the C
Liquefied Petroleum gas (abbreviated L.P. gas or propane), ishighly flammable. It becomes liquid when stored under high pres-sure inside a cylinder an
• A Type 1 compatible cylinder with a Type 1 cylinder valve has a back-check valve which does not permit gas flow, until a pos-itive seal has been obt
Step 1 Unlock Grill Legsas shown.Step 2 Remove both Regulators from bottom of grill. Carefully lower both Left and Right Grill Legs into the locked
8 Carefully insert Shelf Lipon Right Side Shelf into TopChannel, while at the same timemaking sure the Notches on theside Flaps fit into the Flangeso
91. Inspect the gas supply hoses before each use. Hosescan be burned or chafed if they are routed improperly.See that hoses have no kinks, sharp bends
Comments to this Manuals